Setting The Clock Time; Setting The Alarm Time - Iluv i277 Instruction Manual

iLuv Stereo Audio System for Your iPod
TM
GETTING STARTED

Setting the Clock Time

1. To set the time, first locate the SET TIME button. Press and hold the SET TIME button down until the display begins to flash. Turn the SELECT wheel
to select 24H or 12H. Then press SET TIME button to confirm. Rotate the SELECT wheel until the desired time is displayed. Remember to choose the
correct AM or PM setting.
Note: There is an icon to the right of the time display that signifies PM. Please be aware that there is no AM indicator.
2. To secure the time setting, press the SET TIME button once more to confirm.
3. To set the correct year you may either, rotate the SELECT wheel until the present year is displayed, or you may press the SET TIME button initially to
accept the current setting. Press the SET TIME button once more to secure year setting.
4. At this point, you will see the date display flashing in the lower right corner of the display. Press the SET TIME button to accept the current setting or
turn the SELECT wheel until the current date is displayed. Press the SET TIME button to secure date setting.

Setting the Alarm Time

This unit supports two alarm settings for dual alarm feature.
1. To set the Alarm Time, first press and hold the ALARM 1 or the ALARM 2 button until the display begins to flash. Then rotate the SELECT wheel until
the desired alarm time is displayed, an icon to the right of the time will light up indicating PM, but please take notice that there is no indicator for AM.
2. Press the WAKE TO button and select the option for desired alarm sound: iPod, radio or buzzer.
3. Press the ALARM 1 or ALARM 2 button to pre-set the volume level when the Alarm(s) are activated. Use the SELECT wheel to adjust the volume level
from 1 to 40. When the Alarm(s) are activated, the volume will gradually rise from low to the pre-set setting.
4. Press the ALARM 1 or ALARM 2 button once more to exit the alarm setting mode.
Notes:
•
Now that you have set the Alarm Time, the i277 is now activated and set to wake you up. To ensure this setting, you will see an Alarm Icon appear on
the display. If see Wake Icon need press again Alarm button the Wake Icon show on display few second
•
Take notice of the adjusted volume level and make sure it is set at an appropriate level for waking up.
- 11 -
V11M10_IM_EN_11012006
www.i-Luv.com