Setup Requirements; Intended Use; How The Test Works - iHealth BG5 Owner's Manual

• Travel Case • USB Charging
Cable
• Owner's Manual
Note: * These contents may vary according to geographic
markets. You must check your package.
If any items printed on the package are missing from your
package or the package is opened prior to use, please
contact the place of purchase for assistance.
The lancing device can be used several times, however, the
lancet should be changed after each use.

SETUP REQUIREMENTS

The iHealth Wireless Smart Gluco-Monitoring System (BG5)
is designed to be used with the following iPod Touch ,iPad,
iPhone models:
iPod Touch 5
iPod Touch 4
iPhone 5
iPhone 4S
iPhone 4
iPad Mini
iPad 4
iPad 3
• Control Solution*
• Quick Start Guide
2
iPad 2
The iOS version of these devices should be V5.0 or higher.

INTENDED USE

The iHealth Wireless Smart Gluco-Monitoring System (BG5)
should be used for:
• Quantitative measurement of glucose in fresh capillary
whole blood samples drawn from the fingertip, palm,
forearm, upper arm, calf or thigh
• Single person measurement only and should not be
shared
• Self-testing outside the body (in vitro diagnostic use) by
people with diabetes at home as an aid to monitor the
effectiveness of diabetes control
The iHealth Wireless Smart Gluco-Monitoring System (BG5)
should not be used for the diagnosis of or screening for
diabetes, or for neonatal use.
Alternate Site Testing (AST) should be done only during
steady – state times when glucose levels are not changing
rapidly.
Control Solutions are intended for use with the Wireless
Smart Gluco-Monitoring System (BG5). Control Solutions
can be used to check that the glucose meter and test strips
are working properly and that the measurement is accurate.
These Control Solutions contain a known amount of
glucose, as indicated on the bottles. If you need to
purchase additional Control Solution, you can call Customer
Service at +1-855-816-7705.

HOW THE TEST WORKS?

The iHealth Wireless Smart Gluco-Monitoring System (BG5)
3