Components; External Luminaire Components; Components External Luminaire Components - Philips VL3500 WASH Service Manual

Components

External Luminaire Components

The following illustration shows the external luminaire components and controls.
Input Panel Components
Product Label ID
Main Power
Switch
AC Input Cable
02.96 86.001 0 A
C
Head Assembly
Houses color, strobe, and
beam spreader mechanisms
Front Lens Assembly
Backcap Assembly
Provides access to lamp
for replacement and
provides controls for
beam adjustment.
Yoke Assembly
Houses Master Control
Board (MCB).
Upper Enclosure Assembly
Houses power supply, ballast,
and display board.
Menu Display
Used to input manual
commands, program, test,
set defaults and access
internal status information.
AC PWR
~
DATA IN DATA THRU
AC IN
Data In
Data Thru
: E
OMPONENTS XTERNAL
AC Input Cable
Input Panel
Provides DMX In and Thru,
and AC Power connections.
(see detail below)
MENU ENTER
L C
UMINAIRE OMPONENTS
Beam Adjustment Controls
CAUTION:
RISK OF FIRE. USE ONLY 1500 WATT, H TYPE 100V METAL HALIDE LAMP,
SFc10-4 BASE.
ATTENTION:
RISQUE D'INCENDIE. UTILISER UNIQUEMENT UNE LAMP A HALOGENE EN METAL DE
TYPE H, 1500 WATT, 100V ET UN SUPPORT SFc10-4.
CAUTION:
RISK OF EXPOSURE TO EXCESSIVE ULTRAVIOLET RADIATION. DO NOT OPERATE
WITHOUT COMPLETE LAMP ENCLOSURE IN PLACE OR WHEN LENS IS DAMAGED.
DISCONNECT FIXTURE
BEFORE RELAMPING
CAUTION: HOT LAMP
LUMINAIRE MUST REMAIN
POWERED ON FOR 5 MINUTES
AFTER DOUSING LAMP.
DO NOT
OPEN FOR 5 MINUTES
AFTER SWITCHING OFF.
Y Z
1
X
7