Get A Gps Signal; Mount The Trx7 In Your Vehicle - Magellan eXplorist TRX7 Quick Start Manual

5. Get a GPS Signal.

1. Swipe down from the top right corner of the screen.
2. Tap Settings > scroll down to Location access.
3. Make sure Access to my location is turned ON.
4. Make sure GPS satellites is checked.

6. Mount the TRX7 In Your Vehicle.

1. Find a location with a clear view of the sky.
2. Clean the area on the windshield where you want to
mount the device. Allow the surface to dry.
3. Screw the mount baseplate on the cradle.
4. Attach the device onto the mount.
5. Attach the mount to the vehicle.*
6. Plug the device into your Vehicle Power Outlet using
the Vehicle Power Adapter supplied with your TRX7.
Please use only the supplied VPA.
*RAM suction and U-Bolt mounts both require additional
assembly.
Note: Go to trxsupport.magellangps.com
and videos about setting up and operating your TRX7,
and get in touch with our Magellan TRX Support team via
email at trxsupport@magellangps.com.
Various factors influence GPS signal reception and
there are some tips you can follow to improve the signal
reception and time it takes to calculate the current
location.
• Leave any enclosed structure, (garage, parking
• Make sure you have a 'clear view of the sky'. Buildings
• Be sure that the device is mounted where it can have a
for articles
Note: The first time the device calculates its location can take up
to 1 minute. Subsequent times will be 15 seconds on average.
Important
structures, etc.).
and trees can have an impact on GPS signal reception.
clear line of sight to the windshield.