Get Started; Update Software + Maps; Create Your Trx Account - Magellan eXplorist TRX7 Quick Start Manual

Get Started.

1. Power On
Press and hold the Power button to turn the device on.
2. Connect to Wi-Fi
1. Swipe down from the top right of the screen > tap Wi-Fi
(may read Wi-Fi Off).
2. Slide On/Off button to On.
3. Tap Wi-Fi again to see available networks.
4. Enter Wi-Fi password (if applicable).
5. Tap Connect.

3. Update Software + Maps.

Note: Wi-Fi must be ON to get updates as well as to sync
your TRX7 with your TRX Trailhead account. You must also
have a good internet connection to complete updates.
1. Tap the blue Magellan button on the TRX7 Home
screen to open the TRX Dashboard.
2. Tap Settings from the TRX Dashboard.
3. Tap Software Update or Map Update.
4. Follow the instructions to update to the latest
software version or download the latest map data.

4. Create Your TRX Account.

1. Tap Settings from the TRX Dashboard.
2. Tap Account Profile > tap Register New Account.
3. Enter your account details. Use your existing
MagellanGPS.com
4. Tap Register to confirm your account details. You'll
receive a confirmation email. If you used an existing
MagellanGPS.com
registered to that account.
A MagellanGPS.com account will also be created if you're
new to Magellan and you're registering an email address
for the first time.
Go to www.TRXTrailhead.com
account > enter your email and password to log in with
your TRX/Magellan GPS account.
account if you have one.
account, your TRX7 will be
once you've created your