Fundamentals; Powering On The Magellan Roadmate Receiver; Checking Battery Level And Gps Status; Volume - Magellan RoadMate N393M Series User Manual

Powering on the Magellan RoadMate receiver

The Power button is located on the top of the Magellan RoadMate receiver.
Turning the Magellan RoadMate receiver On
1. Press the Power button.
2. After the initial splash screen the Warnings screen is displayed. Read and
tap .
Turning the Magellan RoadMate receiver Off
1. Press the Power button.

Checking Battery Level and GPS Status

The Magellan RoadMate receiver has an internal battery that permits use of
the receiver for brief periods of time while not connected to external power.
The battery is charging whenever the Magellan RoadMate is connected to
external power. Please note that this battery can only be serviced by
authorized Magellan repair facilities.
Viewing the Battery Level Indicator
1. While viewing the Map screen, tap
2. The battery level indicator is located in the upper right corner of the Menu
screen, just below the satellite signal indicator. Green bars indicate battery
level.
The Magellan RoadMate can normally function for 2 hours on battery when the
battery life is full.
Checking GPS Status
1. While viewing the Map screen, tap on the Menu button.
2. The GPS status indicator is located in the upper right corner of the Menu
screen. Four green bars would indicate optimum satellite signal reception.

Volume

Changing the Volume from the Map Screen
1. Tap the speaker icon
4

Fundamentals

. Additional controls appear.
on the Menu button.