Figure 33. Braking Resistor Circuit With a Thermal Fuse.
Figure 34. Shown below is a typical connection diagram using an MCCB with a Trip Coil (TC) in
lieu of an input contactor. A control transformer is required for 400-volt models only. The primary
MC is opened in the event of a DBR over-current detection. With no power supplied to the ASD
the failure will not be displayed on the EOI; see the Trip History for failure information once
G9 ASD Quick Start Guide
79
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net