Creating Test Variables
Figure 83. Calculation module configuration created
3.
Creating Test Variables
In order to run the calculations, certain test variables must be created. This is done
by using Vtrin user interface and Variable list view. For example, the following bat
file is executed to create consistent names.
%APP_ROOT%\Calculations\APP_CalculationExamples\APP_CalculationExampl
e\CreateTestVariables.bat
138
To create a new calculation task, do the following:
a.
Select the newly Calculation Module and select Edit > New.
b.
Specify the properties. Refer
Appendix B Calculation using C# Calculation File
Table
19.
2PAA107563-600 B