Table of Contents
Advertisement
User Interface for Managing Archive Data
Field
Active Volume Indicates which volume is currently active.
Volume
Volume ID
(Volume)
State
Timeout
Usage
Init Time
Last Archive
Time
Archive Volume Aspect
The Archive Volume aspect provides a user interface for managing an archive
volume and provides detailed information for the volume. This includes a listing of
the archive entries currently stored within the volume, and a listing of the logs
104
Table 9. Archive Device Aspect Main View (Continued)
Indicates the Volume number (Volume Index).
For scheduled archive, the volume ID is auto-generated based on
the configured Next label and Volume Format attributes. For manual
archive, the volume ID must be specified in the Initialize Volume
dialog.
Indicates the state of the volume. Possible states are:
VALID If the media is initialized and has space for archiving
additional information includes: Fully Published or Partially Published
and if the media is from HPUX, HP-UX will be shown.
NOT_INIT Not initialized but configured in the device, or corrupt
FULL When archive is unable to archive in this volume due to not
enough.
space, then media becomes FULL.
NO_MEDIA There is no media present in this slot
Overwrite timeout for this volume as specified when the volume was
initialized.This specifies the delay between the time when the volume
becomes full and the time when the volume can be re initialized
(overwritten).
Indicates the amount of space that is currently occupied on this
volume.
Time when the volume was initialized.
Time when the last archive entry was written to this volume/
Section 7 Configuring Archives
Description
2PAA107563-600 B
Hide quick links:
Advertisement
Table of Contents
