1 7.TANK removal
Remove the nut for the tank.
Note at the installation
When take off Nut, remove a packing together.
Tightening torque is from 15.0 to 30.0 N・m.
1 8.BACK PANEL removal
Screw
Remove the screw. (1 place)
Remove the terminal cover.
Screw
Screw
×4
Screw
Remove the screws. (16 places)
Nut
Remove the screw. (2 places)
Remove the panel for fixing the tank.
Remove the TANK.
Remove the insulation sheet
for the terminal.
Screw
×4
-28-
Screw
Insulation sheet
Remove the insulation sheet
for the tank.
Remove the BACK PANEL.
Screw
Insulation sheet