Calibration - WEIGHSOUTH WSI-602 Instruction Manual

Calibration Settings in the Parameter;
• Turn on the scale
• Press
show
• Press key until it displays
• Press
• Press
• Press
• Press
• Display will show
• Press
• Press
• When scale get stable, Press
• Display will be show
• Place the test weight on the platform.
• After stable, press
• Display will be show
• Then will start self-test and will come to normal display
Note: the unit (kg / lb) is the same as the last displayed one.
That is: before you restart the scale to do calibration, if
you see the unit is kg, then in calibration, the unit is kg; if you
want to change to lb, you need to press U key to change the unit
before you restart it.

8. CALIBRATION

key during self checking, display will
key to confirm display will show
and
key to show display
key to enter calibration,
key until display show
key into calibration, display will show
key confirm
keys, display will show
key,
F1 off
tch
pin
P1 spd
P2 cal
desc
Cal
unload
load
pass