Operation; Power On/Off; Zero; Tare - WEIGHSOUTH WSI-602 Instruction Manual

Initial Start-up
Warm-up time of 15 minutes stabilizes the measured values after
switching on.

6.1 Power ON/OFF

Switch on the scale by pressing
the self test is started.
If you want to switch off press the key again.

6.2 Zero

Environmental conditions can lead to the balance exactly zero in
spite of the platform not taking any strain. However, you can set the
display of your balance to zero any time by pressing
therefore ensure that the weighing starts at zero.

6.3 Tare

The weight of any container can be tared by pressing
that with subsequent weighing the net weight of the object being
weighed is always displayed
• Load weight on the pan.
• Press
• Remove weight from the platform. Tared weight is
displayed. It can set only one tare value. It can display
with a minus value.
• Press

6.4 Change unit

In weighing condition, you can press
lb.

6. OPERATION

key. Zero is displayed, and tare is subtracted.
key. Zero is displayed, tare weight is cleared.
. The display is switched on and
to change the unit: kg /
key and
key so