Table of Contents
Advertisement
3
Faults and what to do
about them.
Emergency release
F a u l t s a n d w h a t t o d o a b o u t t h e m .
E.g. in the event of a power cut
The programme continues when the
power supply is restored.
However, if the laundry has to be
removed, the washing machine door
can be opened as follows:
:
Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot water
and laundry.
If possible, leave it to cool down first.
:
Warning
Risk of injury!
You may injure your hands if you reach
into the drum while it is turning.
Do not reach into the drum when it is
turning.
Information on the display panel
Display
è Off
è lights up
è flashes
A Off
A lights up
A flashes
i-DOS adjustment
value, e.g. K flashes
Cause/remedy
The door is locked, at the end of the programme or when paused, if laundry can be
added.
During the programme. Door locked.
■
Paused: Temperature too high. Wait until the temperature drops.
■
Paused: Spin speed too high. Wait until the drum comes to a standstill.
■
Paused: Water level too high. It is not possible to add laundry. Touch A to
■
continue the programme.
Slow: The door cannot currently be locked or unlocked. Waiting time required.
■
Fast: Close the door because water can flow out from the laundry loads.
■
At the end of the programme, while the door is open
After the start of the programme
Before the programme starts, paused
Minimum filling level detected in the corresponding dispenser, top up. ~ Page 21
Faults and what to do about them.
Wait until the drum has stopped turning.
Caution!
Water damage
Any escaping water may cause water
damage.
Do not open the door if water can be
seen through the glass.
Switch off the appliance. Pull out the
1.
mains plug.
Drain the water
2.
Pull the emergency release
3.
downwards with a tool and release.
The door can then be opened.
~ Page 27
.
en
29
Hide quick links:
Advertisement
Table of Contents
