Changing The Programme; Cancel The Programme; Programme End; Removing Laundry/Switching Off The Appliance - Bosch WAT28660GB Instruction Manual And Installation Instructions

For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Follow the information on the display
panel.
The load display is not active during
■
reloading.

Changing the programme

If you have started the wrong
programme by mistake, you can
change the programme as follows:
Touch the control panel A.
1.
Select another programme.
2.
And touch A again.The new
3.
program starts from the beginning.

Cancel the programme

For programs at high temperature:
Touch the control panel A.
1.
To cool the laundry: Select Rinse.
2.
And touch A again.
3.
For programmes at low temperatures:
Touch A.
1.
Select Spin or Drain/Empty.
2.
And touch A again.
3.

Programme end

End lights up in the display panel and
the A and è displays are off.
If the Û display flashes, this
Note:
informs you to run the Drum Clean
programme or any other programme at
a washing temperature of at least
60 °C.
Removing laundry/switching
off the appliance
Open the loading door and remove
1.
the laundry.
Switch off the appliance.
2.
Operating the appliance
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber gasket dry.
■
Leave the washing machine door
■
and detergent drawer open so that
any residual water can dry away.
Always wait for the end of the
■
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
en
19