I-Dos Settings - Bosch WAT28660GB Instruction Manual And Installation Instructions

Wat series
Table of Contents

Advertisement

Programme default settings
en
increments of 30 minutes and up to a
maximum of 24 h (h=hour).
After the programme starts, the
selected time, e.g. 8.5 h is displayed
and counted down until the washing
programme starts. The duration of the
programme is then displayed.
The programme duration is
Note:
automatically adjusted when the
programme is running. Changes to the
programme default settings or
programme settings, foam detection
function, unbalanced load detection, the
load or soiling may also change the
programme duration.
After the programme starts, and while
the selected time is counting down, you
can change this as follows:
Touch the control panel A.
1.
Touch N or M to change the time.
2.
And touch A again.
3.
After starting the programme, while the
programme is running, you can add or
remove laundry if necessary.
~ Page 18

i-DOS settings

Your washing machine has an intelligent
dosing system for liquid detergent and
fabric softener.
The washing machine doses your
detergent and fabric softener
automatically in most programmes.
The following have been preset at the
factory:
w i-DOS: L
Detergent dosage for lightly soiled
laundry
i i-DOS: K
Fabric softener dosage for a
medium level of softness
14
i-DOS w for detergent
Adjustment values for the dosage
quantity
Light:
L
For lightly soiled laundry
Medium:
K
For normally soiled laundry
Heavy:
J
For particularly heavy soiling and/
or staining
off Automatic dosing deselected,
manual dosage ~ Page 22
You can change the settings for
automatic detergent dosing before the
washing programme starts and during
pre-wash (if selected). Touch the control
panel i-DOS w for this.
You can find information on degrees of
soiling on ~ Page 13.
i-DOS i for fabric softener
Adjustment values for dosage
quantities
Light:
L
For slightly soft laundry
Medium:
K
For laundry with a medium level of
softness
Heavy:
J
For particularly soft laundry
off Automatic dosing deselected
Depending on what stage the
programme is in, you can change the
settings for automatic detergent
dosage. Touch the control panel i-
DOS i for this.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wat series

Table of Contents