Application Software - Panasonic CF-47 Series Reference Manual

Dealing With Problems
Setup Utility
[Enter Password] is dis-
played
[Advanced] menu can not
be registered
All or some items in [Se-
curity] menu can not be
registered
F9 does not work
[Coffee Break Password]
cannot be selected

Application Software

Computer hangs
Network
Unable to connect to a
network
Sound
The sound is not heard
The volume of MIDI file
cannot be adjusted
Unusual Sound
The computer produces
a strange sound
MPEG File
A blue background
appears on the screen
with the MPEG image
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
You need to set the User Password.
Press Ctrl + Alt + Del
After shutting down by pressing the sleep switch for more than four seconds, slide
the power switch to power on and open the application again.
If the program no longer operates normally, go to [Start] - [Settings] - [Control Panel]
- [Add/Remove Programs] to delete the program. Then reinstall the program.
When using the computer as a network computer, additional settings may need to
be set depending on the usage conditions. Ask your system administrator or the
person in charge of the network.
The computer must be restarted if suspend or hibernation mode is entered.
Try changing the mute by pressing Fn + F4 .
Has the Setup Utility been used to set [Speaker] to [Disable]?(
page 37
If the computer enters the ECO mode or the LCD is closed while the computer is
making a sound, the computer may produce a strange sound, but this does not
indicate a problem.
If the computer has not been used for a long period of time, it may produce an
unusual sound at start up. The sound may continue for a short period of time, but
if the computer starts up in a normal manner, then the problem is not serious. If,
however, the computer fails to start up, contact Panasonic Technical Support.
Did you open the CD-ROM drive or remove the MPEG CD while it was operating?
Re-insert the MPEG CD and close the CD-ROM drive. Press Enter .
to reboot the computer.
44
page 31)