Using Modem - Panasonic CF-47 Series Reference Manual

Using Modem

When using the internal modem, set [Internal Modem] or [Internal Modem/LAN] to
[Enable]* in the Setup Utility. (* Default)
1
Connecting a telephone line to the internal modem
It is not possible to connect the internal modem to any of the following lines.
Internal home phones
Intercoms
CAUTION
Do not use the PBX internal phone lines installed in company offices. Doing
so may lead to a fire or electric shock.
NOTE
There are cases telephone construction (or installation) work will be neces-
sary depending on the shape of the connector of the telephone line.
2
Select [Dialing Properties] in [Start] - [Settings] - [Control Panel]
- [Modems].
3
Add the check mark for [Don't detect my modem...] and then
press [Next].
4
Press [Have Disk].
5
Model with an internal modem
Input [c:\util\drivers\modem] and then press [OK].
Model with both an internal modem and an internal LAN
port
Input [c:\util\drivers\combo] and then press [OK].
6
Press [Next].
7
Select [Com3] and then press [Next].
8
Press [Finish].
9
Restart the computer.
10
Performing the "Country" setting for the modem
In [Start] - [Run], input [c:\util\drivers\modem\telsel.exe] and then press [OK].
Next, set the country the modem is to be used in.
CAUTION
There are cases the modem will not work properly when this setting is incor-
rect.
Be sure to make separate settings to connect to network services like the Internet or
to use e-mail.
NOTE
Do not use suspend and hibernation functions during communications.
24