Cleaning And Maintaining The Conference Units - Sennheiser ADN-W C1 Instruction Manual

Cleaning and maintaining the conference units

4
2
8
4
Briefly press the priority key
The conference system behaves as set.
If you are using the "Conference Manager" software, you can
also deactivate all delegate units with a mouse (detailed
information can be found in the ADN system manual).
Muting all delegate units temporarily (priority function)
Using the priority function, the chairperson can interrupt a discussion
at any time. The speaking privileges of all chairperson units remain
active at any time.
Keep the priority key
the delegate units.
All conference units – except for the chairperson units – are muted
immediately. The microphone LED
the previously active conference units flash red. You can take the
floor immediately. The microphone LED
2
ring of your chairperson unit light up red.
Release the priority key
The muting of the conference units is canceled. The discussion is
continued.
Cleaning and maintaining the conference
units
Remove the ADN-W BA battery pack from the ADN-W C1 or
ADN-W D1 wireless conference units (see page 8).
Only use a dry and soft cloth to clean the products.
Clean the grids of the conference units with a soft brush or
paintbrush in order to avoid dust deposits.
4
.
4
pressed for as long as you want to mute
8
and the signal light ring
4
.
ADN C1/ADN D1 | ADN-W C1/ADN-W D1
2
8
and the signal light
| 13
of