Kenwood BLP90 Instructions Manual page 5

Manually select a speed by turning
l
the speed control
required speed is reached. At the
end of blending return the speed
control to "O" before removing the
blender.
(P) Pulse – operates the motor in
l
a start/stop action. The pulse will
operate for as long as the lever is
held down.
Do not remove the goblet
l
until the blades have
stopped rotating and the
speed control is in the 'O'
position.
Note: If the blender is removed
from the power unit whilst a speed
is selected the Indicator light will
go out and the motor will stop.
When the blender is replaced
onto the power unit the Power On
light will flash. The speed control
will need to be turned to the 'O'
position before blending can be
resumed.
Refer to the troubleshooting
l
section if you experience
any problems with the
operation of the blender.
until the
8
to use the stir stick
1 Fit the lid to the goblet and
remove the filler cap. DO NOT use
the stir stick in the goblet without
the lid fitted.
2 Insert the stir stick
round the goblet slowly whilst the
motor is operating
3 Use the stir stick to help move
ingredients around the goblet
and prevent clogging during
processing.
hints
To blend dry ingredients - cut into
l
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep
your hand over the opening. For
best results empty regularly.
The processing of spices is not
l
recommended as they may
damage the plastic parts.
For best results do not process for
l
longer than 60 seconds. Operating
the blender for longer may cause
the temperature of the ingredients
to increase.
When making mayonnaise, put all
l
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole
in the lid.
Thick mixtures, e.g. nut butters and
l
dips, may need scraping down. If
the mixture is difficult to process,
add more liquid and use the stir
stick.
5
q and move it
.
2