Table of Contents
Advertisement
(2) Failure Mode (B) Steps and Repair Procedures
The battery was inserted into the
adapter and the Battery Set lamp goes
on, but charging does not start.
Use a tester to check voltage.
Rated voltage on power outlet?
charged by another charger?
The printed circuit board is
Replace the printed circuit
Ambient temperature
OK?
YES
Battery body hot?
NO
YES
Battery voltage stable?
YES
Can the battery be
YES
defective.
board unit.
NO
Regulate ambient temperature.
Set ambient temperature in the
range of 0 to 40°C.
YES
The battery is not charged if the
body temperature is 40°C or
higher.
Fully cool the battery and recharge it.
NO
Apply rated voltage.
The rated voltage is AC 230 V.
NO
NO
Replace the battery.
-8-
Advertisement
Table of Contents
