CAMERA SETUP SCREEN
The Camera Setup screen lets you:
Pair cameras
•
Turn cameras on and off
•
Adjust the resolution
•
Pairing
Your cameras in the kit are paired
to the monitor at the factory. When
you add a new camera to your
system, you have to "introduce" the camera and monitor to each other so they can
communicate.
# You can also use this procedure to move a camera from one channel to a
different channel.
Some things to know about pairing cameras:
If a camera is already assigned to the selected channel, the pairing operation
•
overwrites that camera link with the new one.
Only pair one camera at a time! The monitor links to the first camera it detects.
•
If two or more cameras are in pairing mode, you can't control which camera the
monitor will detect first.
Tap the following icons as they
appear on the screens:
1.
Tap Pairing on the Camera Setup screen.
2.
Tap the channel number you want to pair the camera to.
3.
A message displays with instructions to press the
Press and release the
countdown begins.
# You must press the PAIR button on the front/rear of the camera during the 30
seconds countdown; otherwise, the camera will not be paired.
4.
The system displays live video 3 seconds after the camera is successfully
paired.
button on the camera (see page 10). A 30 seconds
PAIR
This screen should display:
button on the camera.
PAIR
21