Uniden G37 Series Owner's Manual page 20

Main Screen
System
Settings (see
page 27)
Motion
Detection
Settings
(see page 30)
Network
Setup (see
page 32)
Firmware
Upgrade
(see page 34)
20
Sub-Screens
Date & Time
(see page 27)
Time Zone
(see page 28)
Language
(see page 28)
Default Settings
(see page 29)
Format SD Card (see
page 29)
Information
(see page 30)
A single screen lets you set motion detection sensitivity for each
camera. It also lets you determine which viewing areas for each
camera should be masked from motion detection.
Advanced Setup
(see page 32)
Reset Password
(see page 33)
Information
(see page 33)
Lets you select how you want to upgrade your firmware (from
SD card or from server).
What it Does
• Time Setting. Set the current time (in-
cluding Daylight Savings Time).
• Time Zone. Set the time zone for your
G37xx system.
• Set the time zone for your G37xx sys-
tem.
• Enable/Disable Daylight Savings Time
Changes language setting for the monitor.
Restores the G37xx to default settings..
Reformats the SD card and deletes all
existing data.
Displays firmware information for the
monitor and each camera.
Set up Dynamic or Static IP address
Reset Guardian Full HD app password
to default (000000).
Displays information about your network
and the monitor's unique UID number.