Fun Generation ClubFX-1 Beam Flower40W Quad User Manual page 29

Selecting the number of DMX
channels
DMX break
The display shows 'Channels Select' . Press [ENTER] to then select with [UP] and [DOWN] the
number of DMX channels to be used by the device. Control via 4, 6 or 10 channels is available.
When the display shows the desired value press [ENTER] to save the setting and then [DOWN]
to change to the next menu item. To change the menu item without making changes, press
[MODE].
The display shows 'DMX Break' . Press [ENTER] to then select with [UP] and [DOWN] one of the
options for the behaviour of the device in case the DMX connection is interrupted. Choose
'Hold' if you want the device in that case to maintain the state that corresponds to the last
received DMX signal. Choose 'Hold' if you want the device in that case to perform an automatic
run. Choose 'Sound' if you want the device in that case to perform a sound-controlled auto‐
matic run. Choose 'Sound' if you want the device in that case to return to its home position.
When the display shows the desired value press [ENTER] to save the setting and then [MODE]
twice to return to the function selection. To change the menu item without making changes,
press [MODE].
ClubFX-1 Beam Flower 40W Quad
Operating
29