Fun Generation ClubFX-1 Beam Flower40W Quad User Manual page 35

Resetting to factory defaults
Reset Machine
Master and Stand-alone opera‐
tion
Press [ENTER] to call the first menu item 'Reload Default' . With this function, you can reset the
device to factory default setting. All your previously adjusted settings are thereby being irre‐
trievably erased.
If you want to enable this function use [UP] and [DOWN] to select 'ON' and confirm with
[ENTER]. If you want to disable this function use [UP] and [DOWN] to select 'OFF' and confirm
with [ENTER].
Press, if necessary repeatedly, [DOWN] and confirm with [ENTER] to call the menu item 'Reset
Machine' . Use this function to reset positions and colours to their respective programmed
parameters.
If you want to execute this function use [UP] and [DOWN] to select 'ON' and confirm with
[ENTER]. If you do not want to execute this function select 'OFF' and confirm with [ENTER].
Press, if necessary repeatedly, [DOWN] and confirm with [ENTER] to call the menu item 'Master
& Alone' . Use this function to specify whether the device operates as 'Master' and controls
other units, or works in 'Stand-alone' mode.
Use [UP] and [DOWN] to select the desired function and confirm with [ENTER].
ClubFX-1 Beam Flower 40W Quad
Operating
35