Table of Contents
Advertisement
Front View (LEDs and Other Features)
Figure 3
Front View
1
IR Window / IR Blaster—For capturing third-party IR codes from hand-held devices (such as remote controls) or
blasting IR codes. The Wi-Fi LED blinks red when capturing IR codes.
2
Wi-Fi LED—The Wi-Fi LED blinks orange and then blue during the boot process. When the operating system is
running, the Wi-Fi driver changes the LED color depending on the signal strength of its connection to its associated
access point. Colors and signal strength are:
orange=fair to good
•
blue=excellent
•
no light=no connection.
•
3
Data LED—Blue LED indicates streaming audio is received.
4
Link LED/Identification button—Blue LED light indicates that the Controller 200 has been identified in a Composer
Pro project. Press this button to identify this device in Composer Pro.
5
Power LED—Blue LED light indicates AC power is present. This LED turns on immediately after the power is applied
to the device.
6
Factory Restore Button (bottom of device)—Restores the Controller 200 to the factory default settings. See the
"Restoring the Device to the Factory Settings" section on page
OL-27357-01
Front View (LEDs and Other Features)
9.
Cisco Smart+Connected Controller 200 Reference Guide
5
Advertisement
Table of Contents
