Rear View (Input And Output Ports); Connecting Devices - Cisco SCH-CONTROL-200 Reference Manual

Rear View (Input and Output Ports)

Rear View (Input and Output Ports)
Figure 4 Rear View
1
Audio In (1)—3.5 mm jacks for stereo channel input (line level) for one stereo analog source.
2 Audio Out (1 left-right pair)—RCA jacks for stereo channel line output (line level) for amplifiers or audio switches.
3 Video Out—Composite RCA and Component RCA jacks.
4 Serial Port (up to 2) or IR Out (up to 4)—3.5 mm jacks for up to 4 IR emitters or for a combination of IR emitters
and serial devices (up to 2). Jacks 1 and 2 can be configured independently for serial devices, such as receivers or disc
changers (requires serial cable, sold separately.)
5 USB (1 port)—For external storage device with USB support (such as FAT32-formatted devices) or Wi-Fi adapter.
6
Ethernet—RJ-45 jack for a 10/100 Base T Ethernet connection.
7
Power plug port—DC power supply port.

Connecting Devices

Use the Composer Pro software to step through the connection process before or after the physical
Note
connections are completed. See the
Guide
Connect all applicable devices to the Controller 200 using the connection options described in the
following table.
Table 1 Connections Options
Port
Audio In (1)
Audio Out (1 left-right
pair)
Cisco Smart+Connected Controller 200 Reference Guide
6
for more information.
Description
One 3.5 mm jack for stereo channel input (line level) for one stereo
analog source.
Two RCA jacks for stereo channel line output (line level) for
amplifiers or audio switches.
Cisco Smart+Connected Residential Installation and Configuration
OL-27357-01