Table of Contents
Advertisement
M2M Cellular Gateway
Undo
N/A
Back
N/A
5.1.b MAC Control
"MAC Control" function allows you to assign the accessibility to the gateway for different users
based on device's MAC address, including wired hosts or WiFi stations.
In "MAC Control" page, there are three configuration windows for MAC control function. They are
the "Configuration" window, "MAC Control Rule List" window, and "MAC Control Rule
Configuration" window.
The "Configuration" window can let you activate the MAC Control function and specify to black
listing or to white listing the devices in the "MAC Control Rule List" entry. Furthermore, log
alerting can be enabled through an "Enable" checkbox to log events. Another "Known MAC from
LAN PC List" is a tool that you can use to do quick copy the known MAC address of client hosts in
the Intranet to facilitate creating rules. Use the "Copy to" button to copy. Second, the "MAC
Control Rule List" window lists all your defined MAC control rule entry. At last, the "MAC Control
Rule Configuration" window can let you define one MAC control rule.
Configuration
Index skipping is used to reserve slots for new function insertion, when required.
Click the Undo button to restore what you just configured back to the
previous setting. Please note that the restored setting may not be the
factory default setting but a retrieve of what was saved in the memory.
When the Back button is clicked the screen will return to the Web Content
Filters Configuration page.
188
Advertisement
Table of Contents
