Table of Contents
Advertisement
M2M Cellular Gateway
3.1.3 Internet Setup
After specifying the physical interface for each WAN connection, administrator must configure
their connection profiles one after one to meet the dial in process of ISPs, so that all client hosts in the
Intranet of the gateway can access the Internet.
In "Internet Setup" page, there are some configuration windows: "Internet Connection List",
"Internet Connection Configuration", "WAN Type Configuration" and related configuration windows for
each WAN type. For the Internet setup of each WAN interface, you must specify its WAN type of
physical interface first and then its related parameter configuration for that WAN type.
"Internet Setup List" window shows your target WAN type for each WAN interface that gateway
provides.
After clicking on the "Edit" button of a physical interface in "Internet Setup List" window, the
"Internet Connection Configuration" window will appear to let you specify which kind of WAN type
that you will use for that physical interface to make an Internet connection. Based on your chosen
WAN type, you can configure necessary parameters in each corresponding configuration window.
The contents, as shown in above screenshot, may vary depending on the model purchased.
Index skipping is used to reserve slots for new function insertion, when required.
69
Advertisement
Table of Contents
