M2M Cellular Gateway
System Resource Configuration
Item
Value setting
Total Priority
A Must filled setting
Queues of All WANs
By default WAN‐1 is
selected.
WAN Interface
Save
N/A
Index skipping is used to reserve slots for new function insertion, when required.
Description
Define the total priority that is related to configure of each rule‐based QoS
if select Priority Queues of Resource. It is also related to default banwidth
of WANs.
Select WAN‐1 and then the following will show setting function that you
can configure.
(WAN‐1 is available only when WAN‐1 interface is enabled)
The same applies to other WAN interfaces (i.e. WAN‐2).
Bandwidth of Upstream
Specify total upload bandwidth of WAN‐n.
Bandwidth of Downstream
Specify total download bandwidth of WAN‐n.
Total Connection Sessions
Specify total connection sessions of WAN‐n
Click the Save button to save the settings.
211