M2M Cellular Gateway
3.7.1 IPv6 Configuration
The IPv6 Configuration setting allows user to set the IPv6 connection type to access the IPv6
network.
Ensure IPv6 is enabled and saved
Go to Basic Network > IPv6 > Configuration Tab
Select IPv6 WAN Connection Type
IPv6 Configuration
Item
Value setting
1. Only can be
selected when IPv6
WAN Connection
Enable
Type
2. A Must filled
setting
Index skipping is used to reserve slots for new function insertion, when required.
Description
Define the selected IPv6 WAN Connection Type to establish the IPv6
connectivity.
Select Static IPv6 when your ISP provides you with a set IPv6 addresses.
Then go to Static IPv6 WAN Type Configuration.
Select DHCPv6 when your ISP provides you with DHCPv6 services.
Select PPPoEv6 when your ISP provides you with PPPoEv6 account settings.
Select 6to4 when you want to user IPv6 connection over IPv4.
Select 6in4 when you want to user IPv6 connection over IPv4.
109