Line Of Dots Appears In All Scanned Images; Straight Lines In An Image Appear Crooked - Epson WF-2930 User Manual

Related references
Additional Scanning Settings - Advanced Settings Tab

Line of Dots Appears in All Scanned Images

If a line of dots appears in all your scanned images, try these solutions:
• Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the
cloth, if necessary. Paper towels are not recommended.
Caution: Do not spray glass cleaner directly on the scanner glass.
• Make sure any interface cables are securely connected at both ends.
• Remove any dust or dirt that may have adhered to your original.
• Keep the document cover closed to prevent dirt or dust from getting inside.
If you are scanning from the ADF, make sure the ADF edge guide fits against the loaded originals. You
can also try cleaning the ADF and scanning again.
Parent topic:
Related tasks
Cleaning Your Product

Straight Lines in an Image Appear Crooked

If straight lines in an original appear crooked in a scanned image, make sure to place your original
straight when you scan it.
If you are scanning from the ADF, make sure the ADF edge guide fits against the loaded originals. You
can also try cleaning the ADF and scanning again.
Parent topic:
Related tasks
Cleaning Your Product
Related topics
Placing Originals on the Product
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
292