ZyXEL Communications armor z2 NT8700-ROG User Manual page 155

Figure 106 Expert Mode > Maintenance > Remote Management > Remote Access
The following table describes the labels in this screen.
Table 58 Expert Mode > Maintenance > Remote Management > WAN Access
LABEL DESCRIPTION
WWW
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the NBG6817 using this
service.
Secured Client Select All to allow all computes to access the NBG6817.
IP Address
Otherwise, check Selected and specify the IP address of the computer that can access the
NBG6817.
Telnet
Chapter 15 Maintenance
NBG6817 User's Guide
155