Advertisement
Electrical and Structural Requirements
ELECTRICAL REQUIREMENTS
Table fan requires a grounded electrical supply line of
220-240 volts AC, 50/60 Hz circuit. 1.6 m power cord
included. Indoor, dry location use only.
1. Carefully remove the fan from carton and
dispose of packaging. Plug cord directly into
a suitable wall socket and turn on the power
supply. (Figure 1)
2. Select the desired airflow, located on fan base
by rotating switch clockwise. (Figure 2)
The switch speeds are as follows:
0 = OFF
1 = Low
2 = Med
3 = High
3. Pull up on the oscillating knob for non-oscillating
operation. Push down on the oscillating knob for
oscillating operation. (Figure 3)
Turn the tilt angle adjusting knob on the fan's
4.
neck anti-clockwise to loosen and hold the fan
head to adjust up and down to the desired tilt
angle. Turn the tilt angle adjusting knob
clockwise to tighten the fan head once your
fan is at the desired tilt angle. (Figure 4)
How to Set Up Your Desk Fan
▲WARNING
To avoid fire or shock, follow instructions carefully.
Any electrical work not described in these instructions
should only be completed by a licensed electrician.
Figure 3
3
Figure 1
Figure 2
Figure 4
Advertisement
