Features; Conference - AT&T callmaster User Manual

Many features are available for use with your CALLMASTER voice terminal. Because
no organization can use all of the available features, each organization must choose
those that best suit its needs. After the choices have been made, the person within
your organization who manages your telecommunication system must do any
necessary administration and label the feature buttons on individual voice terminals.
This System Manager can tell you how to use the features that have been administered
for your particular CALLMASTER voice terminal. All CALLMASTER voice terminals
have 5 fixed features — Conference, Drop, Hold, Mute, and Transfer. These 5 features,
listed alphabetically, are discussed below.

Conference

To add another party
to an existing call (for a
total of up to 3 parties
in DEFINITY Generic 2
and System 85 or 6
parties in DEFINITY
Generic 1 and System
75)

Features

1 Press [
Conference
Present call is put on hold; all other parties remain
connected to each other
You are given a new call appearance and hear dial
tone
2
Dial number of new party and wait for answer
If party answers, explain who's on the conference call
and go to step3
If party does not answer or if line is busy, press
fluttering 
xxxx
3 Press [
Conference
All parties are now connected
4 Repeat from step 1 to add another party to the
conference call
]
 to return to held call
] again
10