Graco magnum pro plus a20 Repair Manual page 57

Working pressure range
Electric Motor
Operating horsepower
Maximum delivery (with tip)
Paint hose
Maximum tip hole size
Weight, sprayer only
Weight, sprayer, hose, & gun
Dimensions (Upright):
Dimensions (Folded):
Power cord
Fluid inlet fitting
Fluid outlet fitting
Inlet screen (on suction tube)
Wetted parts, pump and hose
Wetted parts, gun
Generator requirement
Electrical power requirement
Storage temperature range◆❖
Operating temperature range✔
◆ When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
332697C
(open frame, universal)
1.17 lpm (.31 gpm)
0.017 in. (0.43 mm)
10.6 kg (23.3 lb)
12.7 kg (26.5 lb)
Length 49.0 cm (19.3 in)
Width 38.9 cm (15.3 in)
Height 94.0 cm (37.0 in)
Length 49.0 cm (19.3 in)
Width 38.9 cm (15.3 in)
Height 74.2 cm (29.2 in)
3/4 in. internally threaded (standard gar-
1190 micron (16 mesh)
stainless steel, zinc plated carbon steel,
brass, ultra-high molecular weight poly-
ethylene (UHMWPE), Carbide, Nylon,
Aluminum, PVC, polypropylene,
fluroelastomer
ultra-high molecular weight polyethylene (UHMWPE), zinc
A45
0-207 BAR, 0-21 Mpa (0-3000 psi)
4.5A
5/8
6.4mm X 15 m (1/4 in. x 50 ft)
1.0 mm², 3-wire, 1.8 m (6 ft)
1/4 npsm external thread
den hose)
aluminum, brass, carbide, nylon,
1500 Watt minimum
220-240V AC 50/60 Hz, I phase, 10A
-35° to 71° C (-30° to 160° F)
4° to 46° C (40° to 115° F)
A60
6.5A
(open frame, permanent magnet DC)
7/8
1.44 lpm (.38 gpm)
0.019 in. (0.48 mm)
15 kg (33.0 lb)
17.1 kg (37.7 lb)
54 cm (21.3 in)
43.8 cm (17.3 in)
94.5 cm (37.2 in)
54 cm (21.3 in)
43.8 cm (17.3 in)
74.7 cm (29.4 in)
7/8 - 14 UNF external thread
1680 micron (12 mesh)
stainless steel, zinc plated carbon steel,
brass, leather, ultra-high molecular
weight polyethylene (UHMWPE), Car-
bide, Nylon, Aluminum, PVC,
polypropylene, fluroelastomer
Technical Data
57