Automatic Programmes - AEG BP931460AM User Manual

5. Press any symbol to stop the signal.
8.3 Heat + Hold
Conditions for the function:
• The set temperature is more than 80
°C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or
roasting procedure ends.
You can activate or deactivate the
function in the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press
display shows: Heat + Hold.
5. Press
When the function ends, an acoustic
signal sounds.

9. AUTOMATIC PROGRAMMES

9.1 Recipes online
9.2 Recipes with Recipe
Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2. Select the menu: Recipes. Press
to confirm.
3. Select the category and dish. Press
EURO Appliances - euappliances.info EURO Appliances - euappliances.info
again and again until the
to confirm.
WARNING!
Refer to Safety chapters.
You can find the recipes for
the automatic programmes
specified for this appliance
on our website. To find the
proper Recipe Book check
the PNC number on the
rating plate on the front
frame of the appliance
cavity.
to confirm.
The function stays on if you change the
heating functions.
8.4 Time Extension
The function: Time Extension makes the
heating function continue after the end
of Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, an
acoustic signal sounds. Press any
symbol.
The display shows the message.
2. Press to activate or
cancel.
3. Set the length of the function.
4. Press
.
4. Select a recipe. Press
When you use the function:
Manual, the appliance uses
the automatic settings. You
can change them as with
other functions.
9.3 Recipes with Weight
Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Recipes. Press
to confirm.
3. Select the category and dish. Press
to confirm.
4. Select the function: Weight
Automatic. Press
5. Use the shuttle to set the food
weight. Press
The automatic programme starts.
ENGLISH 15
to
to confirm.
to confirm.
to confirm.