Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the battery.
2
Follow the procedure from step 1 to step 3 in
3
Remove the keyboard.
4
Follow the procedure from step 1 to step 7 in
Procedure
1
Open the latch and disconnect the I/O-board cable from the I/O board.
2
Remove the screw (M2x3) that secures the I/O board to the palm-rest
assembly.
3
Push the securing tab to release the I/O board from the palm-rest assembly.
58
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
"Removing the optical
"Removing the base
Before
drive".
cover".