Connecting The Rear Speakers To Power; Making A Wired Connection To The Rear Speakers; Mounting Your Speakers - Bose Lifestyle 650 Owner's Manual

Connecting the rear speakers to power

1. Connect one end of the power cord into your wireless receiver.
2. Plug the other end of the power cord into an AC (mains) outlet.
3. Repeat steps 1 and 2 to set up your other speaker.
Making a wired connection to the
rear speakers
You can also hard wire your rear speakers through the use of an adapter kit
(sold separately).
To purchase the kit, contact your local Bose® dealer or visit www.Bose.com
CAUTION: Do not use any unauthorized wiring to connect the speakers to your Bose
system. Using unauthorized wires may damage your Bose system and its
components.

Mounting your speakers

You can mount the speakers on wall brackets, floor stands or table stands. To purchase
these accessories, contact your local Bose® dealer or visit www.Bose.com
CAUTIONS:
• Only use Bose hardware to mount the speakers. Using unauthorized mounts may
damage your Bose system and its components.
• The speaker wire and interconnect cables included with this system are not approved
for in-wall installation. Please check your local building codes for the correct type of
wire and cable required for in-wall installation.
A P P E N D I X A : I N S TA L L AT I O N R E F E R E N C E
E N G L I S H - 4 1