Operation - Roland SVC-350 Owner's Manual

OPERATION

7.
After rnakmg the connections shcwn
shown above and turn on the POWER
switch@
2.
A d j u s t i n g t h e i n p u t levels:
M i c r o p h o n e level
Set the MICROPHONE LEVEL control
and so that the red indcator O d o e s
121. I n s t r u m e n t l e v e l
Set the INPUT LEVEL switch @ s o as
to match the level of the instrument
being used. Set the output level of the
instrument so that only the green n d i -
played
Guitar level
Adjust the output level of the guitar so
that the indicator (D lbghts.
puts can be used simultaneously~ in
which case both instruments should
be played at the same time whiie adjust-
ing their outputs so that the red indica-
tor does not light.
Once the input levels have been set,
they should not be changed.
3. A d j u s t i n g t h e o u t p u t level:
5 7.
and
Set the OUTPUT LEVEL switch
level
4. Try producing t h e vocoder sound:
VOCODER and try playing the input in-
strument, In this condition, no sound is
produced
microphone w h ~ l e playing the input in-
strument, The vocoder will produce the
sound of your volce using the tone
color of the input instrument sound.
5. Set the VOICE CHARACTER
trols for the desired sound quality.
6. The output level cf the vocoder
sound 1 s determined by the OUTPUT
VOLUME control @ a n d by the volume
control of the external amplifier being
used. When operating in the DIRECT
mode, the SVC~350 has no direct con-
trol over the output volume. (Adjust
using the volume control of the external
at