Before Operating - Roland SVC-350 Owner's Manual

V O ER
C O D
SVC-350
The is a rack mount type
vocoder designed to accept external
inputs. It is easy to use both in the
studio and o n the stage.
CONNECTIONS
PEDAL SWITCH
F E AT U RE S
Ciear, high quality vocodei sound.
expression follows the expression of the
input voice.
Includes uniquevoice character con-
trols.
W i t h the speciaily designed chorus
circuit, a solo voice input can become
a large chorus.
vocoder tone quality by means of an
external foot switch.
keyboard instrument such as a synthe-
sizer, strings, etc.
enrich the guitar sound,
special compressor and a harmonic
control circuit are included in the guitar
input.
T w o separate output jacks, one for a
amplifier.
circuit.
If both

BEFORE OPERATING

Check with your local Roland dealer
if you want to use theSVC-350in a
foreign country.
on the power switch.
PRECAUTIONS
D o n o t open this unit.
Unplug this unit when it is not to be
used for long periods of time. Unplug
by grasping the plug rather than pull~ng
on the cord.
Be careful not to place heavy objects
on the power cord.
Avoid uslng this unit in very high or
low temperature locations. Also keep it
away from heaters and air-conditioners
since this type of equipment will aifect
circuit and pitch stability.
Avoid usmg this unit in very dusty or
a
If it necessary to use t h ~ s u n ~ t in an
S
I
area with neon or fluorescent lights,
keep it as far away irom these lights as
possible since they will induce high
levels of noise. Sometimes changing
the angle of this unlt in relation to the
lights will help reduce noise.
When connect~ng this unit, plug the
then plug the other end of the cord into
the SVC-350 output. To disconnect, re-
move the cord from the SVC-350 iirst,
then from the ampliiier.
clean this unit, wlpe with a cloth
dampened with a neutral cleanser. D o
not use solvents such as paint thinner.
HEADPHONE