Page 1
Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO” - Sección 2”. A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA) Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com B-HYPE 10 Rev 1.3 cod. 420120255Q...
Page 2
Thank you for choosing a dBTechnologies Product! The new B-HYPE 10 is a versatile active speaker. It is equipped with one 1” compression driver (1” voice coil), and one 10” woofer (1.5” voice coil). The dispersion pattern is asymmetrical on vertical axis, and it is diversified (top and bottom) on the horizontal one.
Page 3
1–Combo Balanced Input (for XLR or TRS the maximum value “MAX”. connectors) 2–Balanced Link output b) If you need to link B-HYPE 10 to another one, please 3–Volume Control use a cable with XLR connectors (not supplied). 4–Audio Input Sensitivity (Line/Mic) Connect the Link output (2) of the first, to the balanced 5–LEDs (Limiter, Signal, Ready)
Page 4
If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions. Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.