Philips sonicare healthywhite+ User Manual page 11

Brushing modes
Clean mode
The ultimate in plaque removal (default mode).
White mode
To brighten and polish your front teeth.
1 Press the power on/off and mode button to switch on the
Philips Sonicare.
2 Press the power on/off and mode button again before
2.5 seconds to switch to White mode.
3 Press the power on/off and mode button after 2.5 seconds to
pause the Philips Sonicare.
Intensity levels
Low: 1 LED indicator light
-
Medium: 2 LED indicator lights
-
High: 3 LED indicator lights
-
Note: To adjust the intensity level to the next higher or lower level, press the
+ intensity level button to increase intensity or the - intensity level button to
decrease intensity at any time during the brushing cycle.
Battery status (when handle is not on charger)
- A flashing yellow battery level indicator indicates a low charge.
- A flashing green battery level indicator indicates a moderate charge.
- A solid green battery level indicator indicates a full charge.
Note: If you hear 5 beeps and the battery level indicator flashes yellow,
this means that you have to recharge the battery. When the battery is
completely empty, the Philips Sonicare switches off. Place the Philips Sonicare
on the charger to charge it (Fig. 3).
Note: To keep the battery fully charged at all times, you may keep the Philips
Sonicare on the charger when not in use.
ENGLISH
11