Mower Deck - Honda HRB536C Owner's Manual

6. TRANSPORTING/STORAGE
NOTICE
• Using a garden hose or pressure washing equipment can force water
into the air cleaner. Water in the air cleaner will soak the filters and can
enter the carburetor or engine cylinder, causing damage.
• Water contacting a hot engine can cause damage. If the engine has
been running, allow it to cool for at least half an hour before washing.

Mower Deck

If using a garden hose or pressure washing equipment to clean the mower
deck, be careful to avoid getting water into controls and cables, or
anywhere near the engine air cleaner or muffler opening.
Before washing the underside of the mower deck, be sure the throttle lever
is in the STOP position and the fuel valve is in the OFF position. Rest the
mower on its right side, so the carburetor side is up. This will help to
prevent fuel leakage and hard starting due to carburetor flooding. Wear
heavy gloves to protect your hands from the blade(s).
Grass Bag (HRB536C)
Remove the bag from the mower, and wash it with a garden hose or
pressure washing equipment. Allow the bag to dry completely before
storage.
2. After washing the lawn mower, wipe dry all accessible surfaces.
3. With the mower in an upright position, start the engine outdoors, and let it
run until it reaches normal operating temperature to evaporate any water
remaining on the engine.
4. While the engine is running, operate the blade control lever 4 or 5 times to
expel water from the blade control mechanism. Allow the blade(s) to spin
for several minutes to ensure that no water remains.
5. Stop the engine and allow it to cool.
6. After the lawn mower is clean and dry, touch up any damaged paint, and
coat other areas that may rust with a light film of oil. Lubricate the control
cable cores with a silicone spray lubricant.
34
E