Understanding Manual Conventions
Before reading this manual, you should understand the meaning of
type styles and number representation used in text. Words typed in
small, boldface type are either buttons, switches, or words actually
found on the plotter. Numbers are shown using SI (International Sys
tem of Units) standards. Numbers with more than four digits are
placed in groups of three, separated by a space instead of commas,
counting both
to
Initial Inspection and Accessories
Inventory
The individual parts of your plotter were thoroughly inspected before
the unit was shipped
operating order. Carefully inspect the plotter and accessories for any
physical damage sustained in transit. Notify the nearest HP Sales and
Support Office or authorized HP dealer and file a claim with the carrier
if the unit is received in a damaged condition.
Please check to ensure that you have received all of the items that
should accompany the plotter. Refer
and check that all accessories are present. If you have any difficulties
with the plotter, if it is not operating properly, or if accessories are
missing, contact the nearest HP Sales and Support Office or authorized
HP dealer.
Retain the original packing materials and carton. If the plotter must be
shipped, this will save having
carton from HP.
1-2
OWNER'S INFORMATION
the left and right of the decimal point (54
to
you, and the instrument should be in good
to
to
order new packing materials and a
321.123
the table of Accessories Supplied
45).