Part Numbers; Using This Manual - HP DesignJet 230 Service Manual

Using this Manual

Purpose
This manual contains information necessary to test, calibrate and service:
D HP DesignJet 230 plotters (models C4694A and C4695A)
D HP DesignJet 250C plotters (models C3190A and C3191A)
D HP DesignJet 330 plotters (models C4701A and C4702A)
D HP DesignJet 350C plotters (models C4699A and C4700A)
For information about using these plotters, refer to the corresponding user and
quick reference guides.
Readership
The procedures described in this manual are to be performed by HP certified service
personnel only.
Training
The HP ongoing training course CEV2 TIJ provides training for HP Customer Engineers and
Authorized Dealers, on servicing the complete HP DesignJet series of large format,
thermal inkjet plotters.

Part Numbers

Part numbers for plotter options, accessories and service parts are located in chapter 10.
Conventions
This manual contains information for the monochrome HP DesignJet 230 and 330 plotters
and the color HP DesignJet 250C and 350C plotters. To highlight the differences between the
various plotters the following symbols will be used in the left margin:
230
This symbol indicates the information specific only to the HP DesignJet 230 and 250C.
250C
330
This symbol indicates the information specific only to the HP DesignJet 330 and 350C.
350C
All other information not marked by these symbols is applicable to all plotters.
The term
D/A1 size plotters
The term
E/A0 size plotters
A small arrow ' is used to indicate other parts of the Service Manual or User's Guide where
you can find information related to the topic you are consulting.
The w symbol is used to indicate the name of a referenced paragraph.
ii Using this Manual
refers generically to models C3190A, C4694A, C4699A and C4701A.
refers generically to models C3191A, C4695A, C4700A and C4702A.
C4699 90000