Additional Safety Warnings; Line Trimmer Safety Warnings - Ryobi RLT1830H13 Original Instructions Manual

of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
Maintain power
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, which can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
SERVICE
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that
tools. Check for
with the charger
safety of the power tool is maintained.

ADDITIONAL SAFETY WARNINGS

Do not expose the product to rain or wet
conditions. Water entering an appliance
will increase the risk of electric shock.
Electrical power should be supplied via
a residual current device (RCD) with a
tripping current of not more than 30 mA.
If you need to use an extension cable
ensure it is suitable for outdoor use and has
a current capacity sufficient to supply your
tool, check it before every use for damage,
always uncoil it during use because coiled
cables can overheat. Damaged extension
cables should not be repaired, they should
be replaced with an equivalent type.
Do not use the product if the electric cables
are damaged or worn.
Make sure the power cord is positioned so
that it cannot be damaged by the cutting
means and will not be stepped on, tripped
over or otherwise subjected to damage or
stress.
Never pick up or carry the product by the
electric cable.
Never pull by the power cord to disconnect
from the power supply.
Keep the power cord away from heat, oil,
water and sharp edges.
Make sure voltage is correct for your
product. A nameplate on the product
indicates the unit's voltage. Never connect
the product to an AC voltage that differs
from this voltage.
Make sure the switch is in Off position
before disconnecting from power supply.

LINE TRIMMER SAFETY WARNINGS

Never allow children, persons with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge or
people unfamiliar with these instructions
to use the product. Local regulations may
restrict the age of the operator.
Use the product in daylight or good artificial
light.
Avoid using on wet grass.
Keep proper footing and balance at all
times.
Do not walk backwards when using the
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
English | 3