Table of Contents
Advertisement
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
■
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
■
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
■
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that safety of the power tool is maintained.
POLE HEDGE TRIMMER SAFETY WARNINGS
■
Keep all parts of the body away from the cutter blade.
A moment of inattention while operating the pole hedge
trimmer may result in serious personal injury.
■
Carry the pole hedge trimmer by the handle with cutter
blade stopped. When transporting or storing the pole
hedge trimmer always fit the cutting device cover.
Proper handling of the pole hedge trimmer reduces
possible personal injury from the cutter blades.
ADDITIONAL SAFETY WARNINGS
■
Some regions have regulations that restrict the use of
the product to some operations. Check with your local
authority for advice. Read all instructions.
■
Clear the work area before each use. Remove all
objects such as cords, lights, wire, or string which can
be thrown or become entangled in the cutting means.
■
Check the hedge for foreign objects, such as wire
fences.
■
Exercise additional caution when using the product near
fencing, posts, buildings, or other immovable objects.
■
To protect yourself from electrocution, do not operate
within 10 m of overhead electrical lines.
■
Beware of thrown objects; keep all bystanders, children,
and pets at least 15 m away from work area. Stop the
product if anyone enters the area.
■
Do not allow children or untrained individuals to use the
product.
■
To stop the product on emergency situation, push the
On/Off switch to the "Off" position.
2
■
Check constantly for persons or animals behind or
inside any hedge or bush to be trimmed.
■
Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
■
Ensure all handles and guards are fitted when using
the pole hedge trimmer. Never attempt to use an
incomplete pole hedge trimmer or one fitted with an
unauthorised modification.
■
Ensure before each use that all controls and safety
devices function correctly. Do not use the product if the
"off" switch does not stop the motor.
■
Inspect the product before each use. Check for loose
fasteners. Make sure all guards and handles are
properly and securely attached. Replace any damaged
parts before use.
■
Do not modify the product in any way.
■
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
■
Wear heavy long trousers, boots, and gloves. Do not
wear loose fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
■
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
■
Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
■
Operating similar tools nearby increases both the risk
of hearing injury and the potential for other persons to
enter your working area.
■
Do not use the product when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
■
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance and can
result in serious injury, or exposure to hot surfaces.
■
Keep all parts of your body away from any moving part.
■
Before starting the product, make sure the cutting
blades will not come in contact with anything.
■
Never operate the product in an explosive atmosphere.
■
While operating the product, always hold it firmly with
both hands by the two handles and ensure that the
operating position is safe and secure. The manufacturer
does not recommend the use of steps or ladders.
■
Ensure that the pole hedge trimmer is correctly located
in a designated working position before starting the
product.
■
Use the harness if it is supplied with your pole hedge
trimmer. It will assist you to support the weight of the
product during use and while moving between trimming
positions. Carefully adjust the harness to fit comfortably.
■
Identify the quick release mechanism and practice
using it before you start using the product. Its correct
use may prevent serious injury in the case of an
emergency. Never wear additional clothing over
the harness or otherwise restrict access to the quick
release mechanism.
■
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not
place your hand or fingers between blades or in any
position where they could get pinched or cut.
■
Always stop the product, disconnect from the power
Advertisement
Table of Contents
