Ryobi RLT1830H13 Original Instructions Manual page 6

product.
Walk, never run.
Keep bystanders, children and pets 15m
away from the area of operation. Stop the
product if anyone enters the area.
Keep the cutting attachment below waist
level.
Never operate the product with damaged
guards or without guards in place.
Never fit a metal replacement line.
Keep hands and feet away from the cutting
means at all times and especially when
switching on the motor.
Beware, the cutting elements continue to
rotate after the motor is switched off.
Beware of objects thrown by the cutting
means. Clear debris like small stones,
gravel and other foreign objects from the
work area before starting operation. Wires
or string may become entangled with the
cutting means.
Switch off and disconnect from the power
supply before:
servicing
leaving the product unattended
cleaning your product or clearing a
blockage
changing accessories
checking for any damage after hitting an
object
checking for any damage if the product
starts to vibrate abnormally
performing maintenance
If your tool is fitted with an adjustable line
cutting blade, before each use, ensure it is
properly adjusted and secured.
Always ensure that ventilation openings
are kept clear of debris.
Before use, check that there are no
damaged parts. A defective switch or any
part that is damaged should be properly
repaired or replaced by an authorized
service facility.
Make sure the cutting head attachment is
properly installed and securely fastened.
Make sure all guards, deflectors and
handles are properly
attached.
Do not modify the machine in any way, this
may increase the risk of injury to yourself
4 | English
or others.
Use only the manufacturer's replacement
cutting line. Do not use any other cutting
attachment.
The small blade fitted to the lawn guard
is designed to trim the new extended line
to the correct length for safe and optimum
performance. It is very sharp, do not touch
it particularly when cleaning the tool.
ADDITIONAL
FOR BATTERY PACKS
Read, understand and always follow
the safety instructions which came with
your battery and charger. Failure to do
so may result in electric shock, fire or
other hazardous situations. Keep all the
instructions together in a safe place for
future reference.
Battery operated product do not have to be
plugged into an electrical outlet; therefore,
they are always in operating condition.
Remove the disabling device whenever
you are not operating the product.
Remove the battery pack before making
any adjustments, cleaning, or removing
material from the product.
Do not place battery products or their
batteries near fire or heat. This increases
the risk of explosion and possibly injury.
Do not open or mutilate the battery pack.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may
be toxic if swallowed.
Protect the battery pack against moisture
and water. Do not charge the battery in a
damp or wet location. Following this rule
will reduce the risk of electric shock.
In case of damage and improper use of the
battery, vapour may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapour can irritate the
respiratory system.
Do not leave the battery pack in a vehicle
or outdoor storage during hot or cold
conditions.
Do not incinerate the battery. When the
battery is beyond it's useful life, dispose of it
correctly according to the local regulations
and securely
in your area.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
SAFETY INSTRUCTIONS