Advertisement
Advertisement
Table of Contents
Related Manuals for Ryobi RLT1830LiX4
Summary of Contents for Ryobi RLT1830LiX4
- Page 1 ORIGINAL INSTRUCTIONS 18V ONE+ Line Trimmer RLT1830LiX4 CLT1830...
- Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
- Page 3 Fig. 1 Fig. 2 Fig. 3...
- Page 4 Fig. 4 Fig. 5 Fig. 6 Fig. 7...
- Page 5 Fig. 8 Fig. 9 Fig. 10 Fig. 11...
- Page 6 Fig. 12 Fig. 13 Fig. 14 Fig. 15...
-
Page 7: General Power Tool Safety Warnings
Safety risk of electric shock. GENERAL POWER TOOL SAFETY WARNINGS ■ Use Right Appliance - Do not force tool. Use the correct tool for your application. The correct tool will do the job WARNING better and safer at the rate for which it is designed. When using electric gardening appliances, basic safety ■... -
Page 8: Additional Safety Rules
Safety out of the reach of children. less than 37˚C. To reduce the risk of serious personal injury, do not store outside or in vehicles. ■ Never use blades, flailing devices, wire or rope. Unit is designed for line trimmer use only. Use of any other ■... -
Page 9: Intended Use
Figure 1 product. 1. Switch trigger ■ If any parts are damaged or missing, please call Ryobi 2. GripZone™ overmold Customer Service for assistance: 3. Lock-out button AUS: 1300 361 505 4. Adjustable front handle 5. -
Page 10: Operation
18. Line release button can result in serious personal injury. 19. Line Figure 12 This product will accept Ryobi One+ 18V lithium-ion battery 5. Rotating rear handle packs and Ryobi One+ 18V nickel-cadmium battery packs. 8. Edger guide For complete charging instructions, refer to the Operator’s 11. - Page 11 Safety THREE-POSITION PIVOTING HEAD ADVANCING LINE See Figure 8. NOTE: The trimmer is equipped with an auto-feed head. Bumping the head to try to advance the line will damage the The trimmer head can be adjusted to three different trimmer and void the warranty. positions.
-
Page 12: Environmental Protection
Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are ■ Remove the battery pack. replaced. Please call Ryobi Customer Service or contact an ■ Remove the spool from the cutting head. authorized service center for assistance. - Page 13 Safety Wear ear protection. Wear eye protection. Beware of thrown or flying objects. Keep all bystanders at least 15 m away. Beware of thrown or flying objects. Keep bystanders a safe distance away from the machine. Do not install or use any type of blade on a product displaying this symbol.
-
Page 14: Product Specifications
PRODUCT SPECIFICATIONS Model RLT1830LiX4 CLT1830 Voltage 18 Volts Cutting capacity 305 mm Cutting line diameter 1.65 mm Weight (without battery) 2.3 kg Weight with battery pack 3.02 kg BATTERY AND CHARGER Model RLT1830LiX4 CLT1830 Battery pack RB18L40 Not included Charger... -
Page 15: Troubleshooting
TROUBLESHOOTING Problem Possible cause Solution Line is welded to itself. Lubricate with silicone spray. Not enough line on spool. Install more line. Refer to Line replacement earlier in this manual. line will not advance when using the auto-feed head: Line is worn too short. Pull line while pressing button. - Page 16 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 27 Clemow Drive Mt. Wellington, Auckland 1060, New Zealand 960994012-02...