Ein- Und Ausschalten; Heizungsanlage Einschalten - Viessmann VITODENS 100-W Manual

Heizungsanlage einschalten

The initial start-up and matching up of the control unit to local conditions and the
structural characteristics of the building must be carried out by your heating
contractor.
We recommend you contact your local heating contractor if you are planning to
start up the heating system that has not been used for a long period.

Ein- und Ausschalten

1. Switch ON the mains power.
Your heating system and the
Vitotrol 100 room temperature con-
troller (if installed) are now ready
for operation.
2. Check the pressure of the heating
system by moving the rotary selec-
tors tw and tr to 9 . The
system pressure appears on the
display.
Minimum system pressure 1.0
bar.
If the pressure of the system is too
low, please notify your heating con-
tractor.
9